Characterization of a loaded high impedance surface - Télécom Paris Accéder directement au contenu
Article Dans Une Revue International Journal of Microwave and Wireless Technologies Année : 2009

Characterization of a loaded high impedance surface

Résumé

A high impedance surface (HIS) consisting of metallic square patches electrically connected one to each other with resistors is shown. Tunability of the absorption factor is achieved by the resistor value. The absorbing band of the loaded HIS is determined by the phase of the signal reflected by this structure. The main contribution of the paper is to demonstrate the absorption behavior over a wide range of incidence angle for both Transverse Electric (TE) and Transverse Magnetic (TM) polarizations. Using an equivalent circuit the resistor effect is investigated. It is shown that at resonance, the judicious choice of the resistor may lead to a significant absorption. The use of a waveguide simulator to characterize the performance of the loaded HIS is investigated. These methods have been used to design an ultra-thin absorber about λ 8.4 GHz /35 thick.
Fichier non déposé

Dates et versions

hal-04242700 , version 1 (15-10-2023)

Identifiants

Citer

Fabrice Linot, Xavier Begaud, Michel Soiron, Christian Renard, Michèle Labeyrie. Characterization of a loaded high impedance surface. International Journal of Microwave and Wireless Technologies, 2009, 1 (6), pp.483-487. ⟨10.1017/S1759078709990596⟩. ⟨hal-04242700⟩
11 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More